PHOTOS COMING SOON
Iron Element 270XL Awning: D-Zip Rooftop Tent Entry and Freestanding
Same quality, new look. The Iron Element 270XL keeps everything you trust about our 270XL awning, now in a refreshed design.
The Iron Element 270XL is a freestanding 270 degree awning with a zippered D-zip entry, so you can climb into your rooftop tent without stepping out from under cover. It gives you extra room to cook, sit and relax in the shade. A welded A-frame keeps the arms strong, the lights are built into every arm, and the poles are already on the frame when conditions take turn.
-
D-zip rooftop tent entry: a zippered opening with improved water redirection.
-
Welded A-frame: better handling and support in poor weather conditions.
-
LED lighting on every arm: touch-button strip lighting with dimming.
-
Telescopic support poles built into each frame: spike ends secure into the ground when the wind picks up.
-
Roof rack and bar brackets included: universal, height-adjustable brackets suit roof rack channels or clamping to bars.
-
Quick set up: tension it out and secure it with the supplied quick release straps.
-
Rain run off poles: fold them up to assist water off the canvas.
-
Stitched-in tie-down points: at the end of each arm and at the mid points.
-
320GSM canvas and a 2500D transit cover: tough canvas, with a cover bag that offers improved strength and scratch resistance.
-
4 mounting channels: adjust the mounting height to suit your vehicle or tent.
-
Sail track rail: hang storage pockets from the awning.
Specifications
| Weight |
32kg (not including brackets) |
| Packed dimensions |
232cm L x 28cm W x 22cm D |
| Canvas |
320GSM |
| Transit cover fabric |
2500D |
| Rooftop tent entry |
D-zip |
| Minimum bracket spacing |
1200mm (the closer to the hinges, the better the support) |
| Warranty |
24 months |
What's Included
- 2 x universal, height-adjustable flat pack brackets for roof rack or bar mounting, with assembly and mounting hardware, including specialised T-bolts for the awning channels
- 2 x quick release rope ratchets
- 6 x pegs and 6 x tie-downs
- 2 x USB connection cables for the lighting
- 1 x small slide-through storage pocket
Add Walls
Wall kits and individual walls are available. Check out the awning accessories page.
Mounting to a Rooftop Tent
For mounting to a rooftop tent, we recommend our AUSMADE Large Awning Brackets. Send us an enquiry if you need help picking the right brackets, or to check the D-zip entry lines up with your tent.
Fitment
The included brackets are universal and height adjustable. They suit roof rack channels (square bolts) or clamping to bars (metal plates and long bolts). Not sure it will suit your rack? Send us an enquiry and we'll confirm before you order.
Installation
Prefer to have it fitted for you? We can install it at our Pakenham workshop. Send us an enquiry to book it in.
- Assemble each bracket to your desired height with 6 x 20mm M8 bolts and 6 x nylock nuts.
- Fix each bracket to your roof rack or bars with at least 4 fixing points.
- Slide at least 4 T-bolts through the awning channels on each bracket (2 top, 2 bottom). Match them to the bracket slots at your chosen height and secure with the washers and nylock nuts.
Wind Safety
This awning is freestanding in calm conditions. In wind, deploy all the poles and use all the tie-downs, and pack it away if it gets worse.
Care and Maintenance
- Unzip the awning all the way to the end before pulling it out so the zips don't snag.
- Tension it evenly at both tensioning points.
- Fold the rain run off poles down and check the canvas isn't caught on the hinge before packing away.
- Clean with warm water and a sponge or soft brush. Use standard car wash solution on the transit bag. Avoid harsh chemicals.
- Air it out after use in damp conditions, and check brackets, hinges and bolts for tightness.
FAQ
What is a D-zip awning? A D-zip awning has a zippered opening that lines up with your rooftop tent entry, so you can get in and out of the tent while staying under the awning.
Can I add walls or brackets to my order? Yes. Enquire and we'll sort it out.
Can you fit it for me? Yes, at our Pakenham workshop. Send us an enquiry to book in.